• Gebruiksaanwijzing Lelo Ida & Tara (Engels)

    THANK YOU FOR CHOOSING LELO

    GETTING STARTED

    To get the most out of your new LELO product, please read the instructions below.

    More detailed information is available online at LELO.com.

    Given the nature of couples’ massagers, we recommend you always a use a premium water-based lubricant for added comfort, and take time to explore together the positions that satisfy most.

    • Before first use, charge massager for 2 hours (p.4).
    • Your remote requires 2 x AAA batteries (included). Insert, and lock battery cover with plastic key provided (p.5).
    •                                         Turn on the massager by pressing  button until the light turns on. To continue to use without the remote, press the  button again (p.10).
    • To use your massager with the remote, press the remote’s + button to activate the wireless connection. The massager will lower its vibrations and change to SenseMotion mode 1, where vibrations are controlled by the movement of the remote (p.7).

    Vibration intensity and rotation speed are synchronized for Dynamic Stimulation, so increasing vibration intensity will increase rotation speed as well. NOTE: It may take up to 5-10 seconds for your massager to detect the remote, so please be patient.

    3  •

    CHARGING YOUR LELO

    Your new LELO massager features a DC charging port located on the side of the device.

    • Insert the DC plug into the charging port.
    • The light on your massager will pulse to indicate that it is charging. When it is fully charged (after ca. 2 hours) the light will emit a steady white glow. Only use original chargers provided by LELO.

    KNOWING WHEN TO CHARGE: If the power in your massager is running low, the light will flash rapidly during operation. SenseMotion products will perform best when quality-brand batteries are used and the massager is fully charged, boosting signal to its fullest.

    • 4

    INSERTING BATTERIES IN REMOTE

    • The battery cover on the remote should be loose when you first open your product. Lift it off and insert the batteries as shown in Diagram 1.
    • Carefully place the cover on top of the battery compartment, ensuring that the ridges are aligned as shown in Diagram 2.

    5  •

    • Once in place, insert the plastic key in the cover’s slot and do a 10 degree twist clockwise to lock shut. To open, always use the key and make a 10 degree turn counterclockwise before replacing the batteries – using other tools such as coins may damage the surface of the remote (see Diagram 3).

    TIP: You may also use flattened palms on either side of the remote to push and twist the lid without using the key to lock and unlock.

    Always ensure the remote is fastened shut before using in water.

    • 6

    USING SENSEMOTION MODE 1

    Turn on your remote by pressing the + button. Once wireless connection is established, the lights on massager and remote will be illuminated. Your massager will now be operating in SenseMotion mode 1. You can intensify vibrations by tilting the remote. When the remote is moved from a horizontal to a vertical position, vibration strength will increase to maximum level.

    NOTE: To TURN OFF the remote’s vibrations, press and hold the

    SenseMotion modes will work as normal, but the remote will flash rather than vibrate. To reactivate vibrations in the remote, hold will remember whether you wish to turn off/on vibrations for future use.

    = 10% Intensity

    = 100% Intensity

    7  •

    USING SENSEMOTION MODE 2

    When in SenseMotion mode 1, press           on your remote to change to SenseMotion mode 2. In this mode, you can alter or intensify vibrations by moving the remote in any direction. Faster movements increase the intensity of vibrations.

    Faster movements increase intensity to 100%

    • 8

    USING PRE-PROGRAMMED MODES

    Pressing the          button for the third time takes you to mode 3, the first of 6 preprogrammed vibration modes where you can change vibration strength with the + and buttons. When your LELO is set to one of these 6 pre-programmed vibration modes, the light on your remote will NOT be illuminated.

    •  Press the + button on the remote to increase the vibration intensity of your massager.
    • Press the center button          to change vibration mode. Once you have cycled through the 6 pre-programmed modes, your massager will return to SenseMotion mode 1.
    • Press the button to decrease vibration intensity.
    • Hold down the button down for around 3 seconds to turn off the remote.
    • Hold down the + and buttons simultaneously for around 3 seconds to lock the control interface and prevent accidental activation. Always lock before travel. To unlock, hold down + and again.

    9  •

    USING YOUR LELO WITHOUT REMOTE

     If you wish to use your LELO massager WITHOUT remote, simply turn on by pressing the  button on the massager itself. Do not turn on the remote.

    Press  again to turn on vibrations. Continue to press  to cycle through the 6 pre-programmed vibration patterns which will be set to 100% intensity. To alter intensity, you will have to turn on the remote by pressing its + button.

    TURNING OFF REMOTE AND MASSAGER

    • Turn off the remote by holding down the button for approximately 3 seconds.
    • Turn off the massager by holding down the button for approximately 3 seconds.

    NOTE: When only the remote is turned off, your massager will go into standby, remaining receptive to signal for 1 hour before turning itself off completely.

    • 10

                                                                                                       TARA

     

     

     

    GETTING STARTED AND USING YOUR LELO

    To get the most out of your new LELO product, please read the instructions below. More detailed information is available online at lelo.com.

    Given the nature of couples’ massagers, we recommend you always a used a premium water-based lubricant for added comfort, and take time to explore together the positions that satisfy most.

    • Before first use, charge massager for 2 hours.
    • Turn on the massager by pressing        button twice in succession.
    •  Continue to press to cycle through the 6 pre-programmed vibration patterns which will be set to 100% intensity.

    Turn off the massager by holding down the        button until vibrations stop.

    CHARGING YOUR LELO

    Your new LELO massager features a DC charging port located on the side of the device.

    TARA is USB-compatible for easy charging.

    • Insert the DC plug into the charging port.
    • The light on your massager will pulse to indicate that it is charging. When it is fully charged (after ca. 2 hours) the light will emit a steady white glow. Only use original chargers provided by LELO.

    KNOWING WHEN TO CHARGE: If the power in your massager is running low, the light will flash rapidly during operation.

     

     

    CLEANING, STORAGE AND SAFETY

    Your LELO product’s lifespan will be greatly increased with proper maintenance and care.

    LELO recommends that you use a water-based lubricant such as LELO’s Personal Moisturizer. Avoid using a silicone-based lubricant as this could make the silicone permanently tacky. If you wish to use a silicone-based lubricant, perform a patch test first.

    Never use massage oil or hand cream as lubricants with your LELO. Always clean your LELO thoroughly before and after each use. The most effective way of doing this is to use a purpose-made cleaning solution such as LELO’s Antibacterial Cleaning Spray. Alternatively, you can wash the silicone with warm water and antibacterial soap, rinse with clean hot water and pat dry with a lint-free cloth or towel. Never use cleansers containing alcohol, petrol or acetone.

    Your LELO is 100% waterproof and submersible to a depth of 1 meter. The open- charging socket is sealed from the internal workings of the massager, so can be cleaned and used underwater freely.

    Avoid leaving your LELO in direct sunlight and NEVER expose it to extreme heat. Store your LELO in a dust-free place and keep it away from toys of other materials.

    IMPORTANT: For Adult Use Only. Those who may be pregnant, have a pacemaker, diabetes, phlebitis or thrombosis should consult with a medical professional regarding the risk of blood clots before using any personal massage product.

    15  •  ENGLISH

    TROUBLESHOOTING

    Your massager’s light does not pulse when charger is connected?

    • Battery is fully charged.
    • Battery is drained and will require several minutes to acknowledge that it is being charged.
    • Charger is not properly connected. Check wall and DC sockets.

    Your remote does not activate when the + button is pressed?

    • Batteries are depleted. Replace or recharge your batteries.
    • Your remote is locked. Hold down the + and buttons for 3 seconds to unlock it.

    There is no connectivity between your massager and remote?

    • You have exceeded the 10 seconds required for your massager to ‘seek’ an active remote. First power off both your massager and remote. Now try again by first activating your remote by pressing the + button, and then pressing and holding the activation button on your massager for 1 second.
    • Your massager or remote is out of power; recharge your massager and replace or recharge your remote’s batteries.

    If you experience any other problems with your LELO or if you have any questions regarding operation, please contact: CUSTOMERCARE@LELO.COM

    • 16

    SPECIFICATIONS

    MATERIALS:                     FDA-approved body-safe silicone/ABS

    BATTERY:                         • Ida, Tara: Li-Ion 3.7v 200mAh

    • Remote 2 x AAA battery

    CHARGING:                 • Ida, Tara: 2 h at 5.0 V 200 mA

    USER TIME:                    • Ida, Tara: Up to 2 hours

    • Remote Up to 10 hours

    STANDBY:                       Up to 90 days (Pleasure Object)

    FREQUENCY:                   120 Hz

    MAX NOISE LEVEL:           <50dB

    INTERFACE:                      • Ida, Tara: Single Button

    • Remote 3-button

    CARRIER FREQUENCY:     2.4GHz

    17  •  ENGLISH

    DISPOSAL INFORMATION